{"title":"YakAttack","description":"","products":[{"product_id":"yakattack-omnihooks","title":"YakAttack - OmniHooks","description":"\u003cp\u003eThe YakAttack OmniHooks™ are a universal add-on to any kayak featuring a bungee system in the stern tankwell. Once attached to bungee, the OmniHooks™ allow you to lash down your YakAttack BlackPak™, bucket, cooler, or milk crate. The OmniHooks are specially designed for the YakAttack BlackPak, fitting in the t-slots featured on each corner of the top rails. Made in the USA and constructed from marine-grade polymers. Sold in a four pack.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eFour Pack\u003c\/li\u003e\n\u003cli\u003eFor tying down YakAttack BlackPak, cooler, bucket, and more!\u003c\/li\u003e\n\u003cli\u003eFor use with bungee systems found in kayak tank well.\u003c\/li\u003e\n\u003cli\u003eWorks with bungee up to: .295”\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448449220685,"sku":"YEP-1007","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/YakAttack_OmniHook_Gear_Tether_Stern_Tankwell_Bungee_YEP-1007_2__26412.1552480674_1.png?v=1630094187"},{"product_id":"yakattack-catchnrelease-drip-rings","title":"YakAttack - CatchNRelease Drip Rings","description":"This deep dish CatchNRelease™ Drip Ring features a unique design which catches water coming off the paddle blade in the high position, and releases it back into the water during your downstroke. We think this is the driest drip ring on the market. Soft and supple, the CatchNRelease Drip Ring is designed to fit all common sized paddle shafts including Werner, Bending Branches, and other popular brands of kayak paddles.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSold in a two pack\u003c\/li\u003e\n\u003cli\u003eFits standard diameter kayak paddles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448453349453,"sku":"YEP-1001","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/DRIP_RING__88505.1573663103_1.png?v=1630094288"},{"product_id":"yakattack-multimount-cup-holder","title":"YakAttack - MultiMount Cup Holder","description":"The YakAttack MultiMount Cup Holder quickly and easily attaches to most kayak track systems. Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene® Bottles to 12 oz cans and water bottles. Not thirsty? The MultiMount Cup Holder also makes a great place to put small tools and other items! Made in the USA from premium materials for a lifetime of use in even the harshest environments. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible.\u003cbr data-mce-fragment=\"1\"\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448454856781,"sku":"SSO-1001","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/SSO-1001__85137.1573750214_1.png?v=1630094267"},{"product_id":"yakattack-zooka-ii-rod-holder-with-track-mounted-locknload-mounting-system","title":"YakAttack - Zooka II Rod Holder with Track Mounted LockNLoad Mounting System","description":"\u003cp\u003eThe YakAttack Zooka II™ Rod Holder is based off our top selling Zooka Tube which we sold for a number of years. It was one of the first rod holders on the market to look different and function differently with no moving parts on the body of the rod holder and used the specific geometry of spinning and casting rods and reels to lock your gear in place without having to move or secure rotating collars or straps. The new and improved Zooka II features the highly popular LockNLoad™ Mounting System and includes a 4\" extension similar to the Omega Pro Rod Holder. Compared to the original Zooka Tube, we have altered the size and geometry of the Zooka II Rod Holder to better accept larger conventional gear and will accommodate just about any rod other than a fly rod. For everyone that enjoyed using the old Zooka Tube or even currently uses it this one is for you and we know you will enjoy the updated, improved, and more secure YakAttack Zooka II Rod Holder.\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448463343693,"sku":"RHM-1004","price":41.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/IMG_8810.2__29892.1552481529_1.jpg?v=1630094120"},{"product_id":"yakattack-omega-pro-rod-holder-with-track-mounted-locknload-mounting-system","title":"YakAttack - Omega Pro Rod Holder with Track Mounted LockNLoad Mounting System","description":"\u003cp\u003eThis is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security.\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448466161741,"sku":"RHM-1002","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/IMG_3350__70090.1552486379_1.jpg?v=1630094163"},{"product_id":"yakattack-omega-rod-holder-with-track-mounted-locknload-mounting-system","title":"YakAttack - Omega Rod Holder with Track Mounted LockNLoad Mounting System","description":"\u003cp\u003eThis is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security.\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448469667917,"sku":"RHM-1001","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/IMG_3354__39283.1598106010_1.png?v=1630094208"},{"product_id":"yakattack-track-mounted-retractor","title":"YakAttack - Track Mounted Retractor","description":"\u003cp\u003eSecure your kayak fishing gear without bulky leashes or floats using the YakAttack Track Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36\" Kevlar cord, and a removable 4\" tether. Designed for track mounting, this kit comes complete with everything you need, and is compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible.\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448471994445,"sku":"RET-1002","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/track-mounted-retractor-ret-1002__72173.png?v=1689903523"},{"product_id":"yakattack-mightymount-ii","title":"YakAttack - MightyMount II","description":"\u003cp\u003eThe MightyMount II is a low profile, highly versatile mount with a small footprint and the same hole pattern as the original MightyMount. Used for attaching accessories requiring a single t-bolt attachment point or YakAttack products that feature the LockNLoad™ mounting system like rod holders, fish finders, and more.\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448478154829,"sku":"MMH2","price":11.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/IMG_0076.1__80589.1550087540_1.png?v=1630094144"},{"product_id":"yakattack-top-loading-geartrac","title":"YakAttack - Top-Loading GearTrac","description":"\u003cp\u003eThe future of Yakattack GearTrac™ has arrived! Instead of having to slide your accessory in from the ends of the GearTrac™ you are able to drop each accessory in from the top. This makes it very easy to adjust positioning while on the water when using multiple kayak fishing accessories on a single piece of GearTrac™. This medium heavy duty surface mount track provides a platform that's not only adjustable, but fully configurable, enabling unparalleled versatility for accessory mounting!\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"0.90in \/ 8in","offer_id":39448487133261,"sku":"GTTL90-08","price":19.95,"currency_code":"USD","in_stock":false},{"title":"0.90in \/ 4in","offer_id":39448488771661,"sku":"GT90-04","price":14.95,"currency_code":"USD","in_stock":true},{"title":"1.75in \/ 8in","offer_id":39448493719629,"sku":"GTTL175-08","price":24.95,"currency_code":"USD","in_stock":false},{"title":"1.75in \/ 4in","offer_id":39448495063117,"sku":"GTTL175-04","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/Yakattack_Top_Loading_GearTrac_best_Kayak_track_for_kayak_fishing_and_rigging_GTTL90-08_2__52225.1554134555_1.png?v=1630094170"},{"product_id":"yakattack-geartrac-spectralite-track","title":"YakAttack - GearTrac SpectraLIte Track","description":"The GTSL90 surface mount track is similar in size and shape to the GT90, but is made from a high end, super strong polymer. Designed for light to medium duty applications, the single GTSL90 kit comes ready to install and includes either a 4\", 8\", 12\", or 16\" track, drilled and with hardware. Want to add some style to your rigged platform? Available in Black and Orange.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e","brand":"YakAttack","offers":[{"title":"Black \/ 8in","offer_id":39448506105933,"sku":"GTSL90-BK08","price":14.95,"currency_code":"USD","in_stock":false},{"title":"Black \/ 4in","offer_id":39448507383885,"sku":"GTSL90-BK04","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/Yakattack_Plastic_GearTrac_best_Kayak_track_for_kayak_fishing_and_rigging_GTSL90-BK08_1__45670.1553791122_1.png?v=1630094274"},{"product_id":"yakattack-rotogrip-paddle-holder","title":"YakAttack - RotoGrip Paddle Holder","description":"Voted Product of the Year for Yak Angler's Kayak Anglers Choice Awards for 2016. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe YakAttack RotoGrip™ Paddle Holder sheds a new light on the age old problem of paddle management. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Kayak and SUP anglers have lots of options for installing and configuring this handy little gadget. Super low profile at 2.25\" tall, the RotoGrip™ Paddle Holder grips the paddle shaft between two soft rollers, securing your paddle quietly and with just the right amount of tension. Sold in single packs.","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448509612109,"sku":"GRP-1001","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/YakAttack_RotoGrip_Paddle_Holder_Best_Kayak_Fishing_Paddle_Holder_Yak_Angler_Produt_of_the_Year_1__50615.1478006212.400.400__62884.1553701687_1.png?v=1630094136"},{"product_id":"yakattack-switchblade-transducer-deployment-arm","title":"YakAttack - SwitchBlade Transducer Deployment Arm","description":"\u003cp\u003eWith a single product you can attach the SwitchBlade to either your YakAttack CellBlok, deck mount, or on a track system. We designed the blade to minimize gurgle and resistance, making the SwitchBlade the most efficient transducer arm on the market. The patented arm folds up compactly. No more cumbersome, rigid arm to deal with. And for the angler that really wants to dial it in to fit their boat perfectly, we made the length of the arms customizable and can easily be cut to length to accommodate nearly any kayak on the market. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eUnlike other transducer deployment arms of the past the new SwitchBlade Transducer Arm from YakAttack is focused on speed and adjustability. Featuring a hydrodynamic blade design the SwitchBlade causes less water turbulence resulting in a faster and less noisy over-the-side transducer mounting solution. Whether the SwitchBlade Transducer Arm is mounted on top of a YakAttack CellBlok or on the gunwale of your kayak the depth of the transducer is easily adjustable and gives you the ability to get the transducer deep enough for your side scan fish finder. If you don't need the full length of the SwitchBlade simple remove the middle arm and now you have a customized solution. To deploy or retrieve the transducer arm the SwitchBlade features a unique tubular design and multi pivot allowing for easy articulation in and out of the water.\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448516001869,"sku":"FFP-1001","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/IMG_6955-1__03669.1553615915_1.png?v=1630094283"},{"product_id":"yakattack-articulating-camera-mount","title":"YakAttack - Articulating Camera Mount","description":"\u003cp\u003eThe articulating camera mount is a clean, simple solution to the issue of camera mounting. It features the new YakAttack ScrewBall, a 1\" ball mount that is durable and made in the USA. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible.\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448530190413,"sku":"CMS-1004","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/Articulating_Camera_Mount__29930.1576270391_1.png?v=1630094237"},{"product_id":"yakattack-panfish-portrait-pro-camera-mount","title":"YakAttack - PanFish Portrait Pro Camera Mount","description":"\u003cp\u003eThe PanFish Portrait Pro™ is an updated version of the original PanFish Portrait that features a more durable construction, LockNLoad base, and new YakAttack camera ball system. The LockNLoad base offers complete 360° rotation while maintaining complete gear security. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003eOne of the most frustrating moments for photographers and videographers is when you purchase a camera mount and you find out it doesn't work with your GoPro (or vise versa). We solved the issue by including both a standard 1\/4-20 camera ball (which fits most standard cameras) and a GoPro attachment, enabling you to get the perfect shot, regardless of the equipment you're using.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe LockNLoad™ track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:\u003cbr data-mce-fragment=\"1\"\u003e- From locked mode, simply squeeze a lever to go into adjustment mode.\u003cbr data-mce-fragment=\"1\"\u003e- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.\u003cbr data-mce-fragment=\"1\"\u003e- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448533631053,"sku":"CMS-1001","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/PFP__73886.1576255518_1.png?v=1630094261"},{"product_id":"yakattack-cellblok-best-kayak-fishing-fish-finder-mounting-solution","title":"YakAttack - CellBlok - Best Kayak Fishing Fish Finder Mounting Solution","description":"\u003cp\u003eDepthfinder installation on kayaks just got smarter. The YakAttack CellBlok is a track mounted battery box and its top surface serves as a mounting platform for the display and transducer deployment arm. No more drilling holes in your kayak or routing wires! Simply loosen the two track mount knobs and the CellBlok allows you to quickly and easily attach or remove your depthfinder. A minimum of 10.5\" of track is required to attach the CellBlok. The YakAttack\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448536744013,"sku":"CLB-1002","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/IMG_5559-2__97762.1603295472_1.jpg?v=1630094178"},{"product_id":"yakattack-gt-cleat-track-mount-line-cleat","title":"YakAttack - GT Cleat - Track Mount Line Cleat","description":"\u003cp\u003eAs the industry leader in track systems and track mounted accessories, we knew we needed a track mounted cleat, and the GT Cleat™ is our simple and highly effective answer.Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. The GT Cleat makes for a perfect companion to our highly popular LeverLoc™ Anchor Trolley and is a low profile, easy to attach and adjust anchor line cleat. The underside of the cleat features two tabs and a rubber washer helping keep the cleat from rotating and sliding in the track from anchor line tension.\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448542183501,"sku":"AMS-1012","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/IMG_2606__26256.1550092266_1.png?v=1630094152"},{"product_id":"yakattack-sidewinder-anchor-line-reel-includes-track-hardware-and-75ft-of-550-paracord","title":"YakAttack - SideWinder - Anchor Line Reel - Includes Track Hardware and 75ft of 550 Paracord","description":"\u003cp\u003eGet your anchor line under control with the YakAttack SideWinder! Designed to make anchor line management simple and effective, the YakAttack SideWinder has some great features packed into a simple and effective design. The line lock groove keeps just the right amount of line deployed, and the tail rope passage means it can be deployed outside your kayak anchor trolley ring for true quick release in dangerous situations. For flat water with no current, use the track mount holes in conjunction with the included Mighty Bolts and knobs to attach the SideWinder directly to your kayak's track system. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible.\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":39448545951821,"sku":"AMS-1010","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/YakAttack_SideWinder_kayak_fishing_kayak_rigging_AMS-1010_1__46853.1550101324_1.png?v=1630094159"},{"product_id":"yakattack-leverloc-anchor-trolley","title":"YakAttack - LeverLoc Anchor Trolley","description":"The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. Features YakAttack Stealth Pulleys for super smooth operation.","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":42175682248921,"sku":"AMS-1003","price":36.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/YakAttack_Anchor_Trolley_best_anchor_trolley_for_kayak_fishing_and_kayaks_AMS-1003__79224.1550161170_1.png?v=1639191910"},{"product_id":"yakattack-leverloc-anchor-trolley-hd","title":"YakAttack - LeverLoc Anchor Trolley HD","description":"The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach.","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":42175725240537,"sku":"AMS-1004","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/YakAttack_Anchor_Trolley_HD_best_anchor_trolley_for_kayak_fishing_and_kayaks_deluxe_anchor_trolley_heavy_duty_anchor_trolley_AMS-1004-2__42614.1550155949_1.png?v=1639191890"},{"product_id":"yakattack-rectangular-fish-finder-mount-with-track-mounted-locknload-mounting-system","title":"YakAttack - Rectangular Fish Finder Mount with Track Mounted LockNLoad Mounting System","description":"No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system, this is the cleanest and most secure mounting solution for larger Lowrance, Garmin, and Raymarine units featuring a gimbal mount such as the Lowrance Hook2 7, Garmin Striker 9sv, and the Raymarine Axion 7. Features the LockNLoad mounting system offering ultra secure attachment to YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).. Hardware included.","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":42176005275865,"sku":"FFP-1003","price":49.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/IMG_7165__88708.1553623793_1.png?v=1639191874"},{"product_id":"yakattack-humminbird-helix-fish-finder-mount-with-track-mounted-locknload-mounting-system","title":"YakAttack - Humminbird Helix Fish Finder Mount with Track Mounted LockNLoad Mounting System","description":"No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system this is the cleanest and most secure mounting solution for the Hummingbird Helix series; 5,7,8, 9, and 10 Features the LockNLoad mounting system offering ultra secure attachment to YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Hardware included. Patent pending.","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":42176048726233,"sku":"FFP-1004","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/IMG_8745__92291.1553626970_1.png?v=1742324305"},{"product_id":"yakattack-padloc-paddle-holder","title":"YakAttack - PadLoc Paddle Holder","description":"The new PadLoc Paddle Holder features heightened security in a simple and budget friendly package. Using two points of contact it offers more holding power than other paddle holders using only a single point. Two rubber bumpers help cushion the paddle entry keeping you quiet and stealthy while on the water. The addition of a security strap gives you extra peace of mind knowing your paddle is safe and secure. The PadLoc Paddle Holder fits kayak paddles with standard size diameter paddle shafts and includes but not limited to Werner and Bending Branches paddles.","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":42176113410265,"sku":"GRP-1002","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/IMG_0001__02555.1571837647_1.png?v=1639191881"},{"product_id":"yakattack-doubleheader-track-mount","title":"YakAttack - DoubleHeader Track Mount","description":"In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The end result of the DoubleHeader Track Mount was a unique addition to the YakAttack product line that allows the ability to attach various accessories using a single attachment point. If you already own two RotoGrip Paddle Holders, then simply remove the rubber washer included with your paddle holders, insert the MightyBolt through the underside of the DoubleHeader, and tighten the body of the RotoGrip. The DoubleHeader in that configuration provides the perfect offset paddle holder solution moving your paddle off the side of your kayak, freeing up track space. Let’s say you want to add dual Omega Rod Holders for crappie fishing. The mounting holes at the end of the DoubleHeader are LockNLoad compatible and allow for easy attachment of LockNLoad accessories like the Omega or Omega Pro. Looking to maximize the number of rods on your kayak for tournament day? The DoubleHeader Track Mount serves as the perfect mounting system for dual AR Tube Rod Holders. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob and MightyBolt from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory-installed kayak track.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIncluded with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe DoubleHeader Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":42176161513689,"sku":"TMA-1001","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/IMG_3277_copy__78951.1624392908_1.png?v=1639191917"},{"product_id":"doubleheader-with-dual-rotogrip-paddle-holders","title":"DoubleHeader with Dual RotoGrip Paddle Holders","description":"In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation for the perfect offset paddle holder solution that our customers have been dreaming of ever since the launch of the RotoGrip several years back. Compatible with standard diameter kayak paddles the RotoGrip Paddle Holder has become the most widely used paddle holder in the industry. The RotoGrip is a simple yet highly effective paddle holder solution, but many paddlers wanted to use one or two RotoGrips on a single side of the kayak. When using two RotoGrips on a single piece of track, you get a nice tight hold, but you also cover up the entire length of the track with your paddle, rendering open track space useless. The DoubleHeader in this configuration eliminates that problem entirely and offsets the paddle holders off the kayak allowing for the full functionality of the remaining track space for other accessories. If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIncluded with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor added paddle security, included with the DoubleHeader and RotoGrip’s are two SnapNStrap Security Tethers. To secure your paddle unhook the bungee tab from the stored position on the base of the DoubleHeader, wrap it around the shaft of your paddle, and loop it over the tab on the outward side of the RotoGrip. This feature will come in handy for kayakers using pedal drive kayaks like a Hobie or motors like a Torqeedo or MotorGuide. In those situations, a paddle might not be needed all the time, so the security tethers provide extra peace of mind knowing your paddle is safe and sound. If you need quick access to your paddle at a moment's notice, the tethers have a stored position, so they do not get in the way when inserting or removing your paddle from the dual RotoGrips.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe DoubleHeader with Dual RotoGrip Paddle Holders is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":42176191103193,"sku":"TMA-1002","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/doubleheader-with-dual-rotogrip-paddle-holders-tma-1002__85783.png?v=1710541007"},{"product_id":"vertical-tie-downs-track-mount","title":"Vertical Tie Downs, Track Mount","description":"The YakAttack Track Mount Vertical Tie Downs come with a Mighty Bolt base. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Perfect as an anchoring point to secure a cooler or any other accessory to the track. Designed to work with 1'' and 1.5'' flat webbing and can also be used with bungee. Made in the USA from premium materials for a lifetime of use in even the harshest environments. Sold in a 2 pack.","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":42840759402713,"sku":"AAP-1025","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/vertical-tie-downs-track-mount-2-pack-aap-1025__14315.1648735361.jpg?v=1653456343"},{"product_id":"blackpak-pro-kayak-fishing-crate-13-x-13","title":"BlackPak Pro Kayak Fishing Crate - 13\" x 13\"","description":"The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe result of intense collaboration and more than a year of R\u0026amp;D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe BLP-PRO-13X13 is 13”x13”x13” (L,W,H). The BlackPak Pro also comes in two other sizes, 13”x16” and a 16”x16”.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eConstruction and Assembly\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInjection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLock panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHinged Lid\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRod Holders\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe included three TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLock panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTankwell Security\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eRubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOptimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRigability\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLock 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003e3 Rod Holders with built-in rod leashes\u003c\/li\u003e\n\u003cli\u003eOptimized for 3600 sized tackle boxes\u003c\/li\u003e\n\u003cli\u003eFits eight 3600 Plano boxes\u003c\/li\u003e\n\u003cli\u003eHinged lid with secure latches\u003c\/li\u003e\n\u003cli\u003eNew lightweight construction\u003c\/li\u003e\n\u003cli\u003eGridLoc Mounting Platform located on every panel\u003c\/li\u003e\n\u003cli\u003eRubberized feet and built in noise dampening features\u003c\/li\u003e\n\u003cli\u003eInternal dimensions (L, W, H) – 11.9” x 11.9” x 11.75”\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (L, W, H) – 12.94” x 12.94” x 13.3”\u003c\/li\u003e\n\u003cli\u003eWhen measuring your kayak's tankwell add 2.75\" for every side you intend to attach TetherTubes\u003c\/li\u003e\n\u003cli\u003eBuild for use in harsh marine conditions\u003c\/li\u003e\n\u003cli\u003eIncludes stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eBuilt for Life Guarantee\u003c\/li\u003e\n\u003cli\u003eSKU: BLP-PRO-13X13\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":42840836964569,"sku":"BLP-PRO-13X13","price":125.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/blackpak-pro-kayak-fishing-crate-13-x-13-blp-pro-13x13__58925.1650636162.jpg?v=1653456333"},{"product_id":"blackpak-pro-kayak-fishing-crate-16-x-16","title":"BlackPak Pro Kayak Fishing Crate - 16\" x 16\"","description":"The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe result of intense collaboration and more than a year of R\u0026amp;D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe BLP-PRO-16X16 is 16” x 16” x 13” (L,W,H) and weighs in at 9.1 lbs. without TetherTubes and 11.5 lbs. with the included six TetherTubes. The BlackPak Pro also comes in two other sizes, 13” x 13” and a 13” x 16”.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eConstruction and Assembly\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInjection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLock panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHinged Lid\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRod Holders\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe included six TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLock panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position. Additional TetherTubes are available for purchase as single and two packs. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTankwell Security\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eRubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOptimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRigability\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLock 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003e6 Rod Holders with built-in rod leashes\u003c\/li\u003e\n\u003cli\u003eOptimized for 3700 sized tackle boxes\u003c\/li\u003e\n\u003cli\u003eHolds seven 3700 boxes with extra room on top for more\u003c\/li\u003e\n\u003cli\u003eHinged lid with secure latches\u003c\/li\u003e\n\u003cli\u003eNew lightweight construction\u003c\/li\u003e\n\u003cli\u003eGridLoc Mounting Platform located on every panel\u003c\/li\u003e\n\u003cli\u003eRubberized feet and built in noise dampening features\u003c\/li\u003e\n\u003cli\u003eInternal dimensions (L, W, H) – 14.9” x 14.9” x 11.75”\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (L, W, H) – 15.94” x 15.94” x 13.3”\u003c\/li\u003e\n\u003cli\u003eWhen measuring your kayak's tankwell add 2.75\" for every side you intend to attach TetherTubes\u003c\/li\u003e\n\u003cli\u003e9.1 lbs. without TetherTubes and 11.5 lbs. with the included six TetherTubes\u003c\/li\u003e\n\u003cli\u003eBuild for use in harsh marine conditions\u003c\/li\u003e\n\u003cli\u003eIncludes stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eBuilt for Life Guarantee\u003c\/li\u003e\n\u003cli\u003eSKU: BLP-PRO-16X16\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":42840848072921,"sku":"BLP-PRO-16X16","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/products\/blackpak-pro-kayak-fishing-crate-16-x-16-blp-pro-16x16__89179.1650636151.jpg?v=1653456329"},{"product_id":"blackpak-pro-kayak-fishing-crate-13-x-16","title":"BlackPak Pro Kayak Fishing Crate - 13\" x 16\"","description":"The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe result of intense collaboration and more than a year of R\u0026amp;D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSize and Weight\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe BLP-PRO-13X16 is 13” x 16” x 13” (L,W,H) and weighs in at 7.6 lbs. without TetherTubes and 9.2 lbs. with the included four TetherTubes. The BlackPak Pro also comes in two other sizes, 13”x13” and a 16”x16”.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eConstruction and Assembly\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInjection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLock panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHinged Lid\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRod Holders\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe included four TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLock panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position. Additional TetherTubes are available for purchase as single and two packs. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTankwell Security\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eRubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOptimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRigability\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLock 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003e4 Rod Holders with built-in rod leashes\u003c\/li\u003e\n\u003cli\u003eOptimized for 3700 sized tackle boxes\u003c\/li\u003e\n\u003cli\u003eFits five 3700 tackle boxes\u003c\/li\u003e\n\u003cli\u003eHinged lid with secure latches\u003c\/li\u003e\n\u003cli\u003eNew lightweight construction\u003c\/li\u003e\n\u003cli\u003eGridLoc Mounting Platform located on every panel\u003c\/li\u003e\n\u003cli\u003eRubberized feet and built in noise dampening features\u003c\/li\u003e\n\u003cli\u003eInternal dimensions (L, W, H) – 11.9” x 14.9” x 11.75”\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (L, W, H) – 12.94” x 15.94” x 13.3”\u003c\/li\u003e\n\u003cli\u003eWhen measuring your kayak's tankwell add 2.75\" for every side you intend to attach TetherTubes\u003c\/li\u003e\n\u003cli\u003e7.6 lbs. without TetherTubes and 9.2 lbs. with the included four TetherTubes\u003c\/li\u003e\n\u003cli\u003eBuild for use in harsh marine conditions\u003c\/li\u003e\n\u003cli\u003eIncludes stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eBuilt for Life Guarantee\u003c\/li\u003e\n\u003cli\u003eSKU: BLP-PRO-13X16\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":42847060820185,"sku":"BLP-PRO-13X16","price":150.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/blackpak-pro-kayak-fishing-crate-13-x-16-blp-pro-13x16.png?v=1703790281"},{"product_id":"yakattack-townstow-bunkster-kayak-cart","title":"YakAttack - TowNStow Bunkster Kayak Cart","description":"\u003cp\u003eMade in the USA to a standard of quality you’ve come to expect from YakAttack; the Bunkster is built from UV-resistant, high-quality, injection-molded polymers and anodized aluminum tubing and assembled with stainless steel hardware. Designed to withstand years of use in harsh outdoor and marine environments, the TowNStow Bunkster is backed by YakAttack's Built for Life Guarantee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Fixed Upright Bunks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bunkster features two fixed uprights configured in the “bunk-style” configuration, where the bars are parallel to the hull of your vessel, which fits many hull shapes of modern-day kayaks. The uprights can easily be repositioned along the axle to maximize compatibility with different kayak widths and body lines of the hull.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eTie-Downs and Bunk Pads\u003c\/strong\u003e\u003cbr\u003eSecuring a kayak to the Bunkster with straps can be different for every model of kayak, so like the BarCart, the Bunkster has multiple integrated tie-down points. Strap loops built into the wheel hubs work great for kayaks that are wider than the wheelbase of the cart, and a centralized tie-down point located at the center of the axle is excellent when transporting narrow watercrafts. The tie-down points are designed for 1” flat webbing cam straps (not included), but you can also use rope that is less than 5\/16” in diameter. For added grip on the underside of your kayak, the Bunkster includes four super “grippy” rubber bumpers. For long-term durability, we opted for designing snap-on rubber bumpers instead of common foam.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eStorage and Components\u003c\/strong\u003e\u003cbr\u003eMany anglers set up their kayaks in the boat ramp parking lot and then cart them to water’s edge, but taking the cart back to their vehicle is not always an option. Doing so leaves your kayak and gear unattended and susceptible to theft. The Bunkster was designed to disassemble completely and without the need for tools. The wheels remove by depressing the button behind the hub on the axle and can literally be done in seconds. The fixed uprights remove by lifting the orange position detent lever and sliding them off the axle. Everything minus the centralized tie-down point can be removed from the aluminum axle, leaving you with five parts that can be stored in most hatches.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Bunkster comes with two kickstands, configured with one on each side to optimize and support the loading angle for both sides of the cart. When not in use, the beefy kickstands snap in place, locked out of the way.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eBuilt for Life Guarantee\u003c\/li\u003e\n\u003cli\u003eToolless adjustment with no loose parts\u003c\/li\u003e\n\u003cli\u003eDesigned for use with 1” cam straps (straps not included)\u003c\/li\u003e\n\u003cli\u003eMade from UV-resistant polymers, anodized aluminum, and stainless steel\u003c\/li\u003e\n\u003cli\u003eMultiple width adjustments\u003c\/li\u003e\n\u003cli\u003eWheels remove by a push of a button\u003c\/li\u003e\n\u003cli\u003eMultiple integrated tie-down points\u003c\/li\u003e\n\u003cli\u003eAll touch-points are highlighted using orange polymers\u003c\/li\u003e\n\u003cli\u003eDual Kick-Away Kick Stands\u003c\/li\u003e\n\u003cli\u003eRubber bunk pads\u003c\/li\u003e\n\u003cli\u003e3-Piece BeadLoc Wheel Design\u003c\/li\u003e\n\u003cli\u003eQuick-release components to quickly stow the cart\u003c\/li\u003e\n\u003cli\u003eBuilt with stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eBuilt for use in harsh marine conditions\u003c\/li\u003e\n\u003cli\u003ePre-Production Weight: 10 – 12 lbs.\u003c\/li\u003e\n\u003cli\u003eWheel size – 12” diameter, 2.5” wide\u003c\/li\u003e\n\u003cli\u003eBunk Orientation Adjustability: Max 16” , Min width 5.75”\u003c\/li\u003e\n\u003cli\u003eAxle Length: 26.5”\u003c\/li\u003e\n\u003cli\u003eFlat surface rating: 450 lbs.\u003c\/li\u003e\n\u003cli\u003eTrail rating: 300 lbs.\u003c\/li\u003e\n\u003cli\u003e5\" drop rating: 200 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":43795009863897,"sku":"TNS-1002","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/img_9867__44520_1.png?v=1684605061"},{"product_id":"yakattack-parknpole-rotogrip","title":"YakAttack - ParkNPole RotoGrip","description":"Since launching the YakAttack ParkNPole a number of years ago customers have been requesting a track mounted solution to secure their stakeout pole. This product is compatible with every length of YakAttack ParkNPole including the 6', 7' 8\", and 8' Link. Using our popular RotoGrip platform, larger wheels were designed to perfectly secure the 0.84” ParkNPole diameter tubing. Super low profile at 2.4\" tall, the ParkNPole RotoGrip secures the shaft between two soft rollers, securing your stakeout pole quietly and with just the right amount of tension. Sold as a single pack.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTo secure your ParkNPole off the side of your kayak, the ParkNPole RotoGrip pairs nicely with a set of SideArm Track Mounts or the DoubleHeader Track Mount. Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eUtilizes the Mighty Bolt to attach to kayak track\u003c\/li\u003e\n\u003cli\u003e2.4\" tall\u003c\/li\u003e\n\u003cli\u003eGearTrac not included\u003c\/li\u003e\n\u003cli\u003eSingle pack\u003c\/li\u003e\n\u003cli\u003ePatent Pending\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":43969185513689,"sku":"GRP-1004","price":14.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/parknpole-rotogrip-grp-1004__97707.jpg?v=1688018267"},{"product_id":"yakattack-gridloc-mightymount-xl","title":"YakAttack - GridLoc MightyMount XL","description":"\u003cp\u003eThe GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1\/8” drill bit will also be needed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew hole pattern designed around the GridLoc Mounting Platform found on the BlackPak Pro\u003c\/li\u003e\n\u003cli\u003eIncludes #10 stainless steel self-threading screws\u003c\/li\u003e\n\u003cli\u003eHardware included is intended for installations on the BlackPak Pro or rotomolded and thermoformed watercrafts\u003c\/li\u003e\n\u003cli\u003ePhillips screwdriver required for installation on BlackPak Pro\u003c\/li\u003e\n\u003cli\u003e1\/8” drill bit needed for surface mounted installs on kayaks\u003c\/li\u003e\n\u003cli\u003eBuilt for use in harsh marine conditions\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"6\"","offer_id":43969190822105,"sku":"MMGLXL-06","price":12.95,"currency_code":"USD","in_stock":true},{"title":"9\"","offer_id":43969191575769,"sku":"MMGLXL-09","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/gridloc-mightymount-xl-6-mmglxl-06.png?v=1711790699"},{"product_id":"yakattack-deluxe-parknpole-clip-kit-with-anti-pivot-mounting-base-and-security-straps","title":"YakAttack - Deluxe ParkNPole™ Clip Kit with Anti-Pivot Mounting Base and Security Straps","description":"Rubber clips for ParkNPole™ with anti-pivot mounting base, security straps, and hardware, 2 pack\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Made in the USA","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":43969194819801,"sku":"PNPCLP-DLX","price":19.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/deluxe-parknpole-clip-kit-with-anti-pivot-mounting-base-and-security-straps-pnpclp-dlx__40472.jpg?v=1688018251"},{"product_id":"yakataack-doubleheader-with-dual-parknpole-rotogrips","title":"YakAttack - DoubleHeader with dual ParkNPole RotoGrips","description":"In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation for the perfect offset ParkNPole holder that our customers have been asking for since the release of the DoubleHeader with dual RotoGrip paddle holders. Compatible with 0.84” diameter shafts, the DoubleHeader with dual ParkNPole RotoGrips has become a popular solution for kayakers needing a place to stow their stake out poles, but before customers had to buy the individual parts and assemble it on their own. Not anymore.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe same as using two RotoGrips on a single piece of track for a paddle, you cover up the entire length of the track with your paddle, rendering open track space useless. The DoubleHeader in this configuration eliminates that problem entirely and offsets the ParkNPole RotoGrips from the kayak allowing for the full functionality of the remaining track space for other accessories. If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIncluded with the DoubleHeader are two different Track Disks. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor added ParkNPole security, included with the DoubleHeader and ParkNPole RotoGrip’s are two SnapNStrap Security Tethers. To secure your ParkNPole, unhook the bungee tab from the stored position on the base of the DoubleHeader, wrap it around the shaft of your pole, and loop it over the tab on the outward side of the ParkNPole RotoGrip.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe DoubleHeader with Dual ParkNPole RotoGrips is made in the USA from marine grade polymers and is backed by YakAttack's Built for Life Guarantee.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eBuilt for Life Guarantee\u003c\/li\u003e\n\u003cli\u003eSingle point of attachment\u003c\/li\u003e\n\u003cli\u003eLockNLoad Compatible\u003c\/li\u003e\n\u003cli\u003eIncludes two ParkNPole RotoGrips\u003c\/li\u003e\n\u003cli\u003eIncludes two SnapNStrap Security Tethers\u003c\/li\u003e\n\u003cli\u003eIncludes two sizes of Track Disks\u003c\/li\u003e\n\u003cli\u003ePerfect for offset ParkNPole storage\u003c\/li\u003e\n\u003cli\u003eCompatible with 0.84” diameter stake out poles\u003c\/li\u003e\n\u003cli\u003eDoubleHeader is 8.25” wide\u003c\/li\u003e\n\u003cli\u003e3.5\" offset\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003eThe DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":43969215103193,"sku":"TMA-1004-BK","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/doubleheader-with-dual-parknpole-rotogrips-black__80566.jpg?v=1688018271"},{"product_id":"yakattack-townstow-scupper-kayak-cart","title":"YakAttack - TowNStow Scupper Kayak Cart","description":"The TowNStow Scupper Kayak Cart is designed to be used exclusively with kayaks that are reinforced and designed to work with scupper carts such as Hobie®. The TowNStow Scupper Kayak Cart takes what you think a scupper cart should do and turns it on its head. This cart is collapsible, user-friendly, adjustable, robust, and features additional fore and aft hull support. With a push of a button or the turn of a knob, the TowNStow Scupper can be assembled, adjusted, or collapsed in seconds. Made in the USA to a standard of quality you have come to expect from YakAttack; the TowNStow Scupper is built from UV-resistant, high-quality, injection-molded polymers and anodized aluminum tubing and assembled with stainless steel hardware. Designed to withstand years of use in harsh outdoor and marine environments, this product is backed by our Built for Life Guarantee. The TowNStow Scupper is designed for transportation over long distances at walking speeds. It is not designed to be towed by any other means, including motor vehicles, ATVs, bicycles, or any method exceeding 5 miles per hour.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBunks and Adjustability\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe classic scupper cart features a pair of posts and rests that support the kayak’s weight right at the radius of the scupper. The trend of larger and heavier sit-on-top fishing kayaks is not going away anytime soon and creates the need for the old school scupper cart to get a facelift. The TowNStow Scupper has four firm but flexible round rubber bunk pads in an orientation that provides additional fore and aft hull support. The bunk pads conform to the hull's shape, keeping the scupper post in place and preventing the post from racking while in the scupper. To accommodate as many kayaks as possible and to help with any variance in scupper width, the bunks are infinitely adjustable from 5.5” to 14.5” wide. This feature differs from the TowNStow BarCart and the Bunkster as they have preset bunk width locations.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eMany anglers set up their kayaks in the boat ramp parking lot and then cart them to water’s edge, but taking the cart back to their vehicle is not always an option. Doing so leaves your kayak and gear unattended and susceptible to theft. The TowNStow Scupper was designed to disassemble completely without the need for tools. Everything can be removed from the aluminum axle in just a few seconds, and in the collapsed state, the cart can be stored in most kayak hatches.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eScupper Barb\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eTraditionally, a scupper cart would feature a locking device at the end of the scupper post, like a linchpin, to lock the cart in place once the post has been inserted into the kayak’s scupper. For heavier and wider kayaks such as a Hobie Pro Angler, this can be cumbersome, so to simplify the process, we added a one-way Scupper Barb. The feature will come into play for those transporting their kayaks in the back of a truck bed. With the Scupper Barb deployed you can insert the Scupper Post into the kayak’s scupper holes while the kayak is still in the truck bed overhanging past the tailgate. Once the Scupper Barbs pass through the hull, they will lock in place, preventing the cart from falling to the ground. This feature makes unloading and loading much easier. Please note this feature is intended for loading and unloading only and is not intended to keep your cart hanging in this orientation while your vehicle is in transit.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWheels and Tie Downs Points\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe wheels included are a 3-Piece BeadLoc wheel design with durable and grippy rubber thread. These tires are airless and designed for use on hard-packed surfaces. A sand tire will be an available add-on at a later date. Strap loops built into the wheel hubs can be utilized if traveling over rough terrain. These tie-down points are designed for use with 1” flat webbing cam straps (not included). The wheels easily snap in place and are removed by a push of a button.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eKickstand\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe TowNStow Scupper comes with two kickstands. For the broadest range of width adjustment, the kickstands are designed to be assembled facing the center of the axle. When not in use, the kickstands snap into the upright position, locked out of the way.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003ch2\u003e\u003cstrong\u003e For use with kayaks that are designed to work with scupper carts\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFour rubber bunk pads with fore and aft hull support\u003c\/li\u003e\n\u003cli\u003eWheels remove with a push of a button\u003c\/li\u003e\n\u003cli\u003eBuilt for use in harsh marine conditions\u003c\/li\u003e\n\u003cli\u003eBuilt with stainless steel hardware\u003c\/li\u003e\n\u003cli\u003e3-Piece BeadLoc wheel design with rubber thread\u003c\/li\u003e\n\u003cli\u003eOptimized for hard-packed surfaces\u003c\/li\u003e\n\u003cli\u003eQuick release components to quickly assemble or stow the cart\u003c\/li\u003e\n\u003cli\u003eTool-less adjustment\u003c\/li\u003e\n\u003cli\u003eTouchpoints are highlighted using orange polymers\u003c\/li\u003e\n\u003cli\u003eDual Kick-Away Kick Stands\u003c\/li\u003e\n\u003cli\u003eMade from UV resistant polymers, anodized aluminum, and stainless steel\u003c\/li\u003e\n\u003cli\u003eDiameter of Scupper post: 1.05”\u003c\/li\u003e\n\u003cli\u003eAxle Length – 26.5”\u003c\/li\u003e\n\u003cli\u003eWheel size – 12” diameter, 2.5” wide\u003c\/li\u003e\n\u003cli\u003eWeight Capacity - Flat surface rating: 450 lbs., Trail rating: 300 lbs., 5 in. drop rating: 200 lbs. \u003cstrong\u003eConsult your kayak manufacturer for how much weight their scuppers will support.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 6 lbs. 4 oz.\u003c\/li\u003e\n\u003cli\u003eAdjustable bunk width with micro adjustments: Min. 5.5”, Max. width 14.5”\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eBuilt for Life Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":44203312971993,"sku":"TNS-1003","price":229.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/1_-_IMG_1280_Edited__21864.png?v=1698813570"},{"product_id":"tracpak-combo-kit-two-boxes-and-quick-release-base","title":"TracPak Combo Kit, Two Boxes and Quick Release Base","description":"Secure, quick access, and versatility were the foundational requirements when designing the TracPak. We wanted the ability to mount one or two storage boxes on a MightyMount or GearTrac, and with the TracPak, you can stack two boxes onto a single mounting point, helping save track space for other accessories. The TracPak features a quick release track base compatible with all YakAttack MightyMounts, GearTrac, and most other factory-installed kayak track. When attached to a track, the Quick Release Base features an array of slots, allowing for micro-adjustments in each direction of the t-bolt. This should maximize compatibility by increasing the locations where the TrackPak will fit on your watercraft. If you would rather surface mount the quick release base, included are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. For surface mounting on anything other than the BlackPak Pro, a 1\/8” drill bit will be required for the installation. Please use a handheld screwdriver and ensure not to overtighten the stainless screws.\u003cbr\u003e\u003cbr\u003eThe stackable storage boxes quickly and securely snap onto the base and on top of each other. When two boxes are stacked on top of each other, you have the ability to not only access the top box, but you can access the bottom box. With interior dimensions measuring 8.375” x 5.375” x 2.375”, there are many ways to utilize this secure quick access storage box. From tools to terminal tackle, the TracPack is a unique and handy storage solution for both recreational and kayak anglers. Sold as a two-pack of storage boxes and includes the quick release base. The TracPak is not waterproof or water-tight and does not float, so each storage box features an eyelet if you choose to use a leash for added security.\u003cbr\u003e\u003cbr\u003eFor enhanced organization, included are four white labels. These adhesive labels are designed to fit on the latch of each box and create an area to identify the contents inside each box using a permanent marker like a Sharpie. If you need replacements or want to have spare boxes, additional TrackPak boxes and the quick release base are also sold separately. Made from marine-grade polymers, the TracPak is designed for use in harsh marine conditions. It is made in the USA and backed by our Built for Life Guarantee.\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes two stackable storage boxes, Quick Release Base, and four white labels\u003c\/li\u003e\n\u003cli\u003eIncludes track mount and surface mount hardware\u003c\/li\u003e\n\u003cli\u003eCombo Kit Weight: 2.44 lbs.\u003c\/li\u003e\n\u003cli\u003eIndividual Storage Box Weight: 1.06 lbs.\u003c\/li\u003e\n\u003cli\u003eInternal dims: 8.375” x 5.375” x 2.375”\u003c\/li\u003e\n\u003cli\u003eExternal dims: 9.5” x 6.5” x 3.625”\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":44783023292633,"sku":"SSO-1002","price":49.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/tracpak-combo-kit-two-boxes-and-track-mount__40832_jpg.png?v=1709986176"},{"product_id":"yakattack-gridloc-through-hull-wiring-kit","title":"YakAttack - GridLoc Through Hull Wiring Kit","description":"\u003cp\u003eThe YakAttack GridLoc Through Hull Wiring Kit is perfect for popular removable fish finder pods on kayaks as well as other applications where wires are needed to be ran through the hull of a kayak or boat. It is also compatible with the GridLoc Mounting Platform featured on the BlackPak Pro, which opens up the possibilities for many more applications like using your BlackPak Pro as a battery box for your motor, actions cameras, etc. The installation does not require access to the backside of the install area, but does require a 1\" hole. Included are 14 rubber inserts with common hole sizes ranging from 0.08” to 0.389” in diameter, 4 blank inserts, 2 nylon grommets, and 2 sets of hardware. If your install requires more than 1” of clearance to run wires or connectors the GridLoc Through Hull Wiring Kit XL version (1.5” hole) of this product would be the best option. For a waterproof seal, marine sealant is required. This is an updated version of our original Through Hull Wiring Kit as compatibility with the GridLoc hole pattern was added to this new version. In addition we added 2 more blank inserts and 2 smaller 0.8\" inserts for smaller wires.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHole Diameter Sizes:\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eA - 0.166\" x 2 units\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eB - 0.191\" x 2 units\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eC - 0.205\" x 2 units\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eD - 0.265\" x 2 units\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eE - 0.345\" x 2 units\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eF – Blank x 4 units\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eG - 0.08” x 2 units\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eH - 0.389” x 1 unit (two halves)\u003c\/em\u003e \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e2 x grommets\u003cbr\u003e14 x rubber inserts with common hole sizes\u003cbr\u003eHole sizing ranges from 0.08” to 0.389” in diameter\u003cbr\u003e4 x blank rubber inserts\u003cbr\u003eCompatible with the hole pattern on the BlackPak Pro\u003cbr\u003eGrommet dimensions: 2.75\" x 1.5\"\u003cbr\u003eRequires 1” hole\u003cbr\u003eMade in the USA\u003c\/p\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":45054292033753,"sku":"EMS-1003","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/gridloc-through-hull-wiring-kit-pair__19843.1693463887_1.png?v=1712808957"},{"product_id":"yakattack-townstow-barcart-kayak-cart","title":"YakAttack - TowNStow BarCart Kayak Cart","description":"After 18 months of intense development, the YakAttack design team has truly redefined the kayak cart category. Combining best-in-class quality and durability with never-before-seen features and functionality, the TowNStow BarCart is one of the most highly engineered and versatile products we’ve ever produced! Designed for extreme duty, the BarCart is universal, collapsible, user-friendly, and robust, requiring no tools to assemble or disassemble. Nothing about this design is what you’d expect, but your expectation will never be the same after using it. With the push of a button or the flip of a lever, the BarCart can be deployed, adjusted, or collapsed in seconds. And with two bunk bar configurations, it boasts unprecedented compatibility with different hull shapes. Made in the USA to a standard of quality you’ve come to expect from YakAttack; the BarCart is built from UV-resistant, high-quality, injection-molded polymers and anodized aluminum tubing and assembled with stainless steel hardware. Designed to withstand years of use in harsh outdoor and marine environments, the BarCart is backed by our Built for Life Guarantee. \u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eBunks and Tie Downs\u003cbr\u003e\u003cbr\u003eWith the vast and ever-evolving shapes of modern-day kayak hulls, we knew our bunk system would require extreme versatility. When we found that inline bars worked better on some boats while crossbars worked better on others, we decided to build both options into the BarCart. You can transport “roof rack style,” putting the bars in a crossbar configuration for boats with pontoon-shaped or reasonably flat bottoms, or you can configure them in a traditional “bunk-style” configuration, where the bars are parallel to the hull of your vessel, for kayaks with more of a “V” shaped hull. In this configuration, the bars can be locked into 6 different positions, depending on your boat’s width and the shape of its hull. Securing a kayak to the BarCart is not a one-size-fits-all proposition either, so we added a number of different tie-down points. Strap loops integrated into the wheel hubs work great for kayaks that are wider than the wheelbase of the cart, and a centralized tie-down point located at the center of the axle is great when transporting narrow watercrafts. The tie-down points are designed for 1” flat webbing cam straps (not included), but you can also use rope with less than 5\/16” diameter. For added grip on the underside of your kayak, the BarCart includes four super “grippy” and easily positionable rubber bumpers. For long-term durability we opted for designing snap-on rubber bumpers instead of standard foam. \u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eStorage and Collapsible Components\u003cbr\u003e\u003cbr\u003eSo, you’re at the launch, now what? Sometimes it’s not convenient to take your cart back to your vehicle, and doing so leaves your kayak and gear unattended and susceptible to theft. We solved this problem by making the BarCart ultra collapsible. The wheels can be removed with the push of a button. The bunk bars, long enough for even the widest fishing kayaks, collapse with a heavy-duty ferrule and bungee system, enabling them to go from a 44” deployed length to less than 18” in a compact and secure package. The uprights fold down, parallel with the axle, making it possible to store the BarCart inside the hull of a kayak. All of this can be performed with no tools using smart and simple buttons and levers. If needed, everything minus the centralized tiedown point can be removed from the aluminum axle.\u003cbr\u003e\u003cbr\u003eWheels\u003cbr\u003eThe wheels included are a 3-Piece BeadLoc wheel design with durable and grippy rubber thread. These tires are airless and designed for use on hard-packed surfaces. The wheels easily snap in place and are removed by a push of a button. If you are interest in the sand tire option of the BarCart Click HERE.\u003cbr\u003e\u003cbr\u003eDual Kickstands\u003cbr\u003e\u003cbr\u003eThe BarCart comes with two kickstands. When configured with one on each side, you can optimize and support the loading angle for both sides of the cart. When not in use, the beefy kickstands snap in place, locked out of the way. \u003cbr\u003e\u003cbr\u003eMade in the USA\u003cbr\u003eBuilt for Life Guarantee\u003cbr\u003eWheels are designed for use on hardpacked surfaces (this is not a sand tire)\u003cbr\u003eUniversal fit for most kayaks or SUP’s\u003cbr\u003eToolless adjustment with no loose parts\u003cbr\u003eDesigned for use with 1” cam straps (straps not included)\u003cbr\u003eMade from UV resistant polymers, anodized aluminum, and stainless steel\u003cbr\u003eEasily adjustable\u003cbr\u003e6 adjustable width positions when in the bunk orientation\u003cbr\u003eBars can be positioned bunk style or roof rack style\u003cbr\u003eCrossbars detach quickly and easily by a simple flip of a lever\u003cbr\u003eWheels remove by a push of a button\u003cbr\u003eMultiple integrated tie down points\u003cbr\u003eAll touchpoints are highlighted using orange polymers\u003cbr\u003eDual Kick-Away Kick Stands\u003cbr\u003ePositionable rubber bunk pads\u003cbr\u003e3-Piece BeadLoc Wheel Design\u003cbr\u003eUprights fold in seconds for easy storage\u003cbr\u003eQuick release components to quickly stow the cart\u003cbr\u003eBuilt with stainless steel Hardware\u003cbr\u003eBuilt for use in harsh marine conditions\u003cbr\u003eWeight Capacity - Flat surface rating: 450 lbs, Trail rating: 300 lbs, 5 inch drop rating: 200 lbs.\u003cbr\u003eProduct Weight: 17 lbs. 5 oz. \u003cbr\u003eWheel size – 12” diameter, 2.5” wide\u003cbr\u003eBunk Orientation Adjustability: Max 16” , Min width 6.25”\u003cbr\u003eCollapsible bunks: 44” assembled, 17.75” collapsed\u003cbr\u003eAxle Length: 26.5”\u003cbr\u003eFolded chassis size – 26.5” L x 7.5” W x 4.75” H","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":45842078630105,"sku":"TNS-1001","price":249.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/38732442b1a58cc00d5ba0543430909e.png?v=1724123389"},{"product_id":"yakattack-gridloc-through-hull-wiring-kit-xl","title":"YakAttack - GridLoc Through Hull Wiring Kit XL","description":"The Through Hull XL Wiring Kit is a larger version of our standard through hull kit with a 1.5\" hole designed around larger diameter components like couplers for live imagining transducers like the Garmin Livescope or bow-mounted trolling motors like the MotorGuide Xi3. It could also be used on popular removable fish finder pods on kayaks as well as other applications where wires are needed to be ran through the hull of a kayak or boat. It is compatible with the GridLoc Mounting Platform featured on the BlackPak Pro, which opens up the possibilities for many more applications like using your BlackPak Pro as a battery box for your motor, actions cameras, etc. The installation does not require access to the backside of the install area, but does require a 1.5\" hole. Included are 12 rubber inserts with common hole sizes ranging from 0.217” to 0.550” in diameter, 4 blank inserts, 2 nylon grommets, and 2 sets of hardware. If you are installing wires smaller than 0.217” in diameter, our standard sized GridLoc Through Hull Wiring Kit would be the best option. For a waterproof seal, marine sealant is required.\u003cbr\u003e\u003cbr\u003e\u003cem\u003eHole Diameter Sizes:\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003eA - Blank x 4 units\u003cbr\u003e\u003cbr\u003eB - 0.217\" x 2 units\u003cbr\u003e\u003cbr\u003eC - 0.265\" x 2 units\u003cbr\u003e\u003cbr\u003eD - 0.320\" x 2 units\u003cbr\u003e\u003cbr\u003eE - 0.389\" x 2 units\u003cbr\u003e\u003cbr\u003eF - 0.460\" x 2 units\u003cbr\u003e\u003cbr\u003eG - 0.550” x 2 units\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e 2 x grommets with stainless steel hardware\u003cbr\u003e 12 x rubber inserts with common hole sizes\u003cbr\u003e Hole sizing ranges from 0.217” to 0.550” in diameter\u003cbr\u003e 4 x blank rubber inserts\u003cbr\u003e Compatible with the hole pattern on the BlackPak Pro\u003cbr\u003e Requires 1.5” hole\u003cbr\u003e Grommet dimensions: 2-5\/16\" x 2-5\/16\" \u003cbr\u003e Made in the USA","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":46334134517977,"sku":"EMS-1004","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/cee496d6-cbd3-4fc9-801d-107a53ca60e0.png?v=1748723111"},{"product_id":"yakattack-throttle-mount-compatible-with-torqeedo-and-newport-vessels","title":"YakAttack - Throttle Mount - Compatible with Torqeedo and Newport Vessels","description":"Featuring the LockNLoad™ mounting system this throttle mount is a great solution for attaching your Torqeedo or Newport Vessels throttle on your kayak or small watercraft. This mount is compatible with the Newport Vessels throttle that is included with their NK180, NK180PRO, and NK300 electric outboard motors. For Torqeedo this mount is compatible with their newer TorqLink Throttle found on their electric outboards starting in 2024 and their previous throttle that was included with the Ultralight 403 and 1103 electric motors. The LockNLoad base featured on this mount gives you piece of mind offering a ultra secure install, but is also very easy to adjust on the water and attach or remove. An updated feature on this new mount is the ability to install the throttle so the LockNLoad extension arm can be articulated left and right rather then only forward and back. This added feature will comes in handy to maximize ideal mounting locations on a wide variety of kayaks and position the throttle so it doesn't interfere with your kayak's seat. Includes all necessary hardware. Patent pending. Throttle not included. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter (AAP-1012) to be compatible.\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with the Newport Vessels throttle\u003c\/li\u003e\n\u003cli\u003eBackwards and forward compatible with the Torqeedo throttle\u003c\/li\u003e\n\u003cli\u003eIncludes the necessary hardware to mount throttle to the top mounting plate\u003c\/li\u003e\n\u003cli\u003eGearTrac and throttle not included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":46876307063001,"sku":"TQM-1002","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/47bf2884-f061-4c23-8156-68aa7b169034.png?v=1754616046"},{"product_id":"16x16-shortstak-upgrade-kit-for-blackpak-pro","title":"16x16 ShortStak Upgrade Kit for BlackPak Pro","description":"Following the release of the reimagined BlackPak Pro, it has been clear that for many anglers, bigger is better. With that concept in mind, our design team began working on solutions to increase the usable space, inside and outside, of the BlackPak Pro. The resulting product does all of that, and will come in three different sizes to fit all three BlackPak Pro models. Please note, this is not a stand-alone box and requires the use of a BlackPak Pro.\u003cbr\u003e\u003cbr\u003eThe ShortStak Upgrade Kit is a stackable box that replaces the lid of a new or existing BlackPak Pro, giving you a second layer of storage for quick access go-to items. Its construction is virtually the same as the BlackPak Pro, however, it is only about 40% of the original height. The bottom edge of the ShortStak side panels is angled to match the geometry of the BlackPak opening, giving you the same water-shedding fit as the original lid.\u003cbr\u003e\u003cbr\u003eWhy would you need a ShortStak addition to your BlackPak Pro? Aside from the obvious, more space for more gear, the possibilities are numerous depending on your style of fishing. If you are like most anglers, your BlackPak Pro is loaded with anything and everything you might need for a day on the water. Sometimes, gear in the bottom of the BlackPak can be difficult to reach from the high-seated position of most modern-day fishing kayaks. Having the ability to build additional space, and gain quick and easy access to your most needed items is vital for anyone who believes in optimizing their efficiency on the water to increase their chances of success. Another scenario would be anyone using electronics and housing their batteries, live scope black box, and excess cables inside of their BlackPak Pro. Regaining that lost storage space is an upgrade that would prove it's worth on every adventure.\u003cbr\u003e\u003cbr\u003eThe design of the ShortStak inherits many of the same features found on the BlackPak Pro. From lightweight injection molded parts and tongue and groove assembly, to the GridLoc mounting platform found inside and outside the crate, making it obvious they were made for each other. An addition of heavy-duty hinges and support straps were critical to restrict any overtravel of the larger top compartment to prevent damage to your BlackPak. Overall, the length and width dimensions of the ShortStak will match the corresponding BlackPak. The interior depth of the ShortStak will be 4.25 inches across all three sizes.\u003cbr\u003e\u003cbr\u003eThe ShortStak features the same GridLoc 2D mounting platform as the BlackPak Pro which offers molded screw bosses giving you the ability to attach accessories inside and outside of the panels. Accessories including the GridLoc MightyMounts and MightyMount XL, Through Hull Wiring Kits, TracPaks, and more.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat is Included with the ShortStak Upgrade Kit:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIncluded in the ShortStak Upgrade Kit, you will receive four ShortStak Side Panels, one Bottom Panel, four rubber ShortStak Bumpers, one pair of hinges, one pair of ShortStak Catches, one pair of Latches, one pair of straps, and all of the stainless steel hardware needed for the assembly. As an upgrade kit for the BlackPak Pro, the ShortStak does not include a lid.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eInjection-molded from UV stabilized polymers, the ShortStak will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e \u003cem\u003eBlackPak Pro and tackle boxes are not included\u003c\/em\u003e\n\u003cul\u003e\n\u003cli\u003eThe ShortStak eliminates the ability to put rod holders on the hinged side of the BlackPak Pro\u003c\/li\u003e\n\u003cli\u003eRequires components from a 16x16 BlackPak Pro\u003c\/li\u003e\n\u003cli\u003eOnly one ShortStak is recommended to be mounted on a BlackPak Pro\u003c\/li\u003e\n\u003cli\u003eThis is not a standalone box\u003c\/li\u003e\n\u003cli\u003eAttaches to the top (not bottom) of a BlackPak Pro\u003c\/li\u003e\n\u003cli\u003eOptimized for easy access items\u003c\/li\u003e\n\u003cli\u003eHinged body with secure latches\u003c\/li\u003e\n\u003cli\u003eRubberized lid bumpers\u003c\/li\u003e\n\u003cli\u003eLightweight construction\u003c\/li\u003e\n\u003cli\u003eGridLoc Mounting Platform located on every panel\u003c\/li\u003e\n\u003cli\u003eInternal dimensions (L, W, H) – 14.9” x 14.9” x 4.25”\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (L, W, H) – 15.94” x 15.94” x 5.25”\u003c\/li\u003e\n\u003cli\u003eProduct Weight – 4.2 lbs.\u003c\/li\u003e\n\u003cli\u003eBuild for use in harsh marine conditions\u003c\/li\u003e\n\u003cli\u003eIncludes stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eBuilt for Life Guarantee\u003c\/li\u003e\n\u003cli\u003eSKU: BLP-AC-0011-BK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":47232211452121,"sku":"BLP-AC-0011-BK","price":67.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/4adec01b-c07c-4877-aa7e-f52595737bf8.png?v=1756158922"},{"product_id":"blackpak-pro-kayak-fishing-crate-13-x-16-battleship-grey","title":"BlackPak Pro Kayak Fishing Crate - 13\" x 16\", Battleship Grey","description":"The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro. \u003cbr\u003e\u003cbr\u003eThe result of intense collaboration and more than a year of R\u0026amp;D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSize and Weight\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe BLP-PRO-13X16 is 13” x 16” x 13” (L,W,H) and weighs in at 7.6 lbs. without TetherTubes and 9.2 lbs. with the included four TetherTubes. The BlackPak Pro also comes in two other sizes, 13”x13” and a 16”x16”.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConstruction and Assembly\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eInjection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHinged Lid\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRod Holders\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe included four TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLoc panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position. Additional TetherTubes are available for purchase as single and two packs. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTankwell Security\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOptimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRigability\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLoc 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 Rod Holders with built-in rod leashes\u003c\/li\u003e\n\u003cli\u003eOptimized for 3700 sized tackle boxes\u003c\/li\u003e\n\u003cli\u003eFits five 3700 tackle boxes\u003c\/li\u003e\n\u003cli\u003eHinged lid with secure latches\u003c\/li\u003e\n\u003cli\u003eNew lightweight construction\u003c\/li\u003e\n\u003cli\u003eGridLoc Mounting Platform located on every panel\u003c\/li\u003e\n\u003cli\u003eRubberized feet and built in noise dampening features\u003c\/li\u003e\n\u003cli\u003eInternal dimensions (L, W, H) – 11.9” x 14.9” x 11.75”\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (L, W, H) – 12.94” x 15.94” x 13.3”\u003c\/li\u003e\n\u003cli\u003eWhen measuring your kayak's tankwell add 2.75\" for every side you intend to attach TetherTubes\u003c\/li\u003e\n\u003cli\u003e7.6 lbs. without TetherTubes and 9.2 lbs. with the included four TetherTubes\u003c\/li\u003e\n\u003cli\u003eBuild for use in harsh marine conditions\u003c\/li\u003e\n\u003cli\u003eIncludes stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eBuilt for Life Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":47232314376409,"sku":"BLP-PRO-13X16-BG","price":155.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/9bbf832f-b23e-4c44-b705-4b83fe39e2de.png?v=1756159518"},{"product_id":"locknload-track-base","title":"LockNLoad Track Base","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eYakAttack’s LockNLoad™ mounting system, is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad™ track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt™, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eMade in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":47247053127897,"sku":"LNL-1001","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/bd3870c7-3b44-484b-bae0-f82ad88c85a1.png?v=1756163260"},{"product_id":"single-attachment-clip-on-retractor","title":"Single Attachment Clip-on Retractor","description":"\u003cp\u003e\u003cstrong\u003eSingle Attachment Clip-On Retractor– Secure, Durable \u0026amp; Built for Anglers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrade your fishing setup with our \u003cstrong\u003eSingle Attachment Clip-On Retractor\u003c\/strong\u003e, designed for durability, reliability, and ease of use. Whether you're\u003cstrong\u003e kayak fishing, fly fishing, or tackling saltwater environments\u003c\/strong\u003e, this \u003cstrong\u003etangle-free retractor\u003c\/strong\u003e ensures that your essential tools stay secure, accessible, and always within reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable \u0026amp; Corrosion-Resistant Construction\u003c\/strong\u003e – Built with high-grade, corrosion-resistant materials that withstand \u003cstrong\u003eharsh saltwater environments\u003c\/strong\u003e, ensuring \u003cstrong\u003elong-lasting performance\u003c\/strong\u003e in all conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Retraction Mechanism\u003c\/strong\u003e – Features a \u003cstrong\u003ehigh-strength, spring-loaded system with 6-10 oz retraction force\u003c\/strong\u003e, keeping \u003cstrong\u003epliers, knives, and fishing tools securely in place\u003c\/strong\u003e without sagging or losing tension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Swivel Clip for Flexible Use\u003c\/strong\u003e – The \u003cstrong\u003erotating clip allows full 360-degree movement\u003c\/strong\u003e, preventing \u003cstrong\u003eline tangling\u003c\/strong\u003e and enabling \u003cstrong\u003eeasy, unrestricted tool access\u003c\/strong\u003e from any angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended 24-Inch Reach with Durable Stainless-Steel Cable\u003c\/strong\u003e – The \u003cstrong\u003ereinforced, long-reach cable extends up to 24 inches\u003c\/strong\u003e, providing \u003cstrong\u003eseamless access to tools\u003c\/strong\u003e while preventing \u003cstrong\u003esnapping, fraying, or premature wear\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-Resistant UV \u0026amp; Water-Resistant Housing\u003c\/strong\u003e – Designed with \u003cstrong\u003eUV-resistant and water-resistant materials\u003c\/strong\u003e, this \u003cstrong\u003eall-weather retractor\u003c\/strong\u003e protects internal components from \u003cstrong\u003esun, saltwater, and moisture exposure\u003c\/strong\u003e for superior durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTangle-Free Retraction System\u003c\/strong\u003e – The \u003cstrong\u003esmooth cable operation eliminates knots and snags\u003c\/strong\u003e, allowing anglers to \u003cstrong\u003efocus on fishing instead of dealing with tangled gear\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact \u0026amp; Lightweight Design\u003c\/strong\u003e – The \u003cstrong\u003eslim, lightweight build minimizes bulk\u003c\/strong\u003e, making it an \u003cstrong\u003eefficient addition to your fishing vest or pack without adding extra weight\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose for Various Fishing Tools\u003c\/strong\u003e – Compatible with \u003cstrong\u003epliers, line cutters, small nets, and other essential fishing tools\u003c\/strong\u003e, offering \u003cstrong\u003eversatility for anglers who need quick, secure access to multiple tools\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose Our Fishing Retractor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur \u003cstrong\u003eheavy-duty retractor\u003c\/strong\u003e delivers superior \u003cstrong\u003edurability, extended reach, and maximum holding power\u003c\/strong\u003e—perfect for serious anglers who demand the best.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaltwater \u0026amp; Freshwater Ready\u003c\/strong\u003e – Built to perform in \u003cstrong\u003eany fishing environment\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrevents Lost Tools \u0026amp; Tangled Lines\u003c\/strong\u003e – Keeps your \u003cstrong\u003egear secure and easily accessible\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted by Anglers\u003c\/strong\u003e – Designed for both \u003cstrong\u003eprofessional and recreational fishing\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YakAttack","offers":[{"title":"Default Title","offer_id":47247058927833,"sku":"NAT-1003","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9098\/files\/b646e72f-2d35-4243-8ce8-21a49667ebd1.png?v=1756163256"}],"url":"https:\/\/www.linecutterz.com\/collections\/yakattack.oembed?page=2","provider":"Line Cutterz","version":"1.0","type":"link"}